Rotary Valve

• Rotor terminal all bevel edge processing, may rduce the friction force with to clamp the material occurrence.
• The entrance picks the special design, causes when the yummy treats the raw material can the smooth yummy treats not be able to produce clamps the material.
• The silt body transports when coca purge, prevented the rawmaterial clamps the cake or nips the material deactivation.
• The bearing is the independent design, may avoid the dust pollution injury bearing and the axis.

Diverter Valve

• The valve special design, reduces the raw material accumulation.
• The flange uses loose flange, the easy scene to match the tube.

Diverter Valve

• Of flange joint the docking uses alone designs, may depend on the pipeline angle to make adjustment various aspects.
• The flow channel uses 3D over all design, reduces the pressure to damage obtains the fluid the best speed of flow.
• The valve seat special design, increases its gas tightness, reduces the valve body damage.
• Uses two PURGE hote, protects the valve seat actuates when security, and can the more rapid actuation localization, continue to transport.

Knife Gate Valve

• The flange surface distance is short, the valve body structuredexterously simplifies.
• The knife switch board design, may exempt the fluid to shear or to crush, increase aeroseal effect.
• The valve body design may avoid the fluid hindering or remaining in YuFat'i, cannot have phenomenon of the product material.

Butterfly Valve

• Working Pressure：10kg/cm² ( 150psi )
• Test Pressure：Body:20kg/cm² ( 300psi )
  Seat: 12kg/cm² ( 170psi )
• Working Temperature：
  NBR: -10°C-120°C
  Ptfe: -75°C-250°C
• Flange：JIS 10K,ANSI 125LBS, ANSI 150LBS
• Normally supplied with gear operated, but can be modified for gear, air cylinder, electrec actuator operation.